Course Requirements

AMT 100 & 101 General Aviation Maintenance Technology:

Airframe and Powerplant Mechanic General Handbook AC65-9A, *
Department of Transportation Federal Aviation Administration

Acceptable Methods, Techniques and Practices Aircraft Inspection and Repair AC43.13-1A&2, **
Department of Transportation Federal Aviation Administration

Standard Aircraft Book,
Leavell & Bungas, Aero Publishers, Fallbrook, CA

Aircraft Batteries - Lead Acid, Nickel/Cadmium EA-AB-1,

Jeppesen Sanderson
55 Inverness Dr. East
Englewood, CO.80112-5498

Federal Aviation Regulation for Mechanics EA-FAR-MO,
Department of Transportation Federal Aviation Administration

Recommended:
Fundamentals of Helicopter

Jeppesen Sanderson
55 Inverness Dr. East
Englewood, CO.80112-5498

AMT 110 & 111 Airframe Maintenance Technology:

Airframe and Powerplant Mechanics General Handbook AC65-9A, *
Department of Transportation Federal Aviation Administration

Airframe and Powerplant Mechanics Airframe Handbook AC65-15A,
Department of Transportation Federal Aviation Administration

Acceptable Methods, Techniques and Practices Aircraft Inspection and Repair AC43.13-1A&2, **
Department of Transportation Federal Aviation Administration

AMT 120 & 121 Powerplant Maintenance Technology:

Airframe and Powerplant Mechanics General Handbook AC65-9A, *
Department of Transportation Federal Aviation Administration

Airframe and Powerplant Mechanics Powerplant Handbook AC65-12A,
Department of Transportation Federal Aviation Administration

Acceptable Methods, Techniques and Practices Aircraft Inspection and Repair AC43.13-1A&2, **
Department of Transportation Federal Aviation Administration

Aircraft Gas Turbine
Jeppesen Sanderson
55 Inverness Dr. East
Englewood, CO.80112-5498
Note: Used in all classes, therefore listed three times though student purchases one time only:

* Airframe and Powerplant Mechanics General Handbook AC65-9A,
** Acceptable Methods, Techniques and Practices Aircraft Inspection and Repair AC43.13-1A&2,

Recommended: Aviation Maintenance Tecnician Powerplant ASA AMT-P Dale Crane

TOOL LIST

The following must be obtained immediately:
Respirator 1 each
Eye Protection Goggles or Shield 1 each
Coveralls 1 each
Welding Goggles 1 each

Suggested Tools:

Tool Box: Top Box or Small Roll-away	Hammers: 8 ounce ball peen 1 each Soft hammer (rubber O.K.) 1 each	Screw Drivers: Straight blade 3 each Phillips #2 1 each Very small straight blade 1 each
Hack Saw Frame and Blades	Common Pliers 1 pair Water Pumps 1 pair Duck Bills 1 each Needle-Nose Pliers 1 each Diagonals 1 each	Adjustable Jaw 12" Wrench 1 each
Awl 1 each	End Wrenches: Combination recommended from 1/4" thru 1" (increments of 1/16") 12 pt. recommended	Socket Sets: 12 pt. common sockets 3/8" drive from 1/4" thru 1" (increments of 1/16") 7/8" deep socket (spark plug) 1 eachor12 pt. common sockets 1/4" drive from 1/4" thru 1/2"and 12 pt. common sockets 3/8" drive from 1/2" through 1"3/8" 12 pt. deep sockets 1 set (optional)
Ratchet Wrenches: 3/8" drive 1 each or 1/4" and 3/8" drive 1 each	Extensions: 3/8" x 3" 1 each 3/8" x 6" 1 eachor 3/8" x 3", 1/4" x 3" 1 eachand 3/8" x 6", 1/4" x 12" 1 each	Speed handle 3/8" drive 1 each
Cold Chisel 1 each,Center Punch 1 each Pin Punches, 1/16" and 1/8" 1 each	Inspection Mirror 1 each	Putty Knife, 1" wide 1 each, Pocket Knife 1 each Scissors 1 pair
Tri-Square (blade may be used as straight edge) 1 each, Compass (pencil type) 1 each	Allen Wrench (small set) (to 1/4") 1 each	2 Cell Flashlight or Inspection Light 1 each Brass Drift 3/4" or 7/8" diameter x 6" 1 each
Recommended Additions: (1 each) Vise-Grips Screw Holder Wobbly Sockets Large Ball Peen 1 Hammer 16-20 ounce Cotter-Key Puller Allen Wrenches for 3/8" drive Large Straight Punch Auto Body Planishing Hammer	Recommended Additions: (1 each)Small Sharpening Stone Large Metal Shears (straight cut) Small First Aid Kit Offset Phillips and Straight Screwdriver	Recommended Additions: (1 each) 3" Magnifying Glass Stubby Screwdrivers Tubeless Tire Inflator Handy Magnet Clipboard Tire Inflation Gauge (low range)